Philips DVP3150V/37 - User Manual

STOP PLAY REW F.FWD PLAY REC CHANNELSTOP/EJECT
VIDEO AUDIOLR
ONE TOUCH RECORDING • LONG PLAY
SOURCE
STANDBY-ON
VCR DVD
DVD
DVP 3150V DVD PLAYER/ VCR
OPEN/CLOSE
Contents
Chapter
Sec. 1: Adjustment Procedures
Schematic Diagrams and CBA's
Exploded Views
Mechanical and Electrical Parts Lists
Sec. 2: Standard Maintenance
Mechanism Alignment Procedures
Disassembly / Assembly of Mechanism
Deck Exploded Views
Deck Parts List
Survey of versions:
Published by FU0619 Service AV Systems Printed in The Netherlands Subject to modification
/37 NTSC
DVD + VCR Combi
DVP3150V/
37
c
Copyright 2006 Philips Consumer Electronics B.V. Eindhoven, The Netherlands.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
or otherwise without the prior permission of Philips.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
KLASS 1 LASER APPARAT
CLASSE 1 PRODUIT LASER
EN 3139 785 32000
Second Generation
Service Manual
Service
Service
Service
This service manual is for DVP3150V/
37
Second
Generation model, which is different from the previous
generation DVP3150V/
37
model.
For Second Generation model, the serial number begins
with SG2B06xxxxxxxx.
Refer to the rating label illustration at right.
SG2B06xxxxxxxx
M A R C H 2 0 0 6
Serial number
Rating label
BarthService

Summary

MAIN SECTION

Adjustment Procedures

Procedures for device adjustment and calibration.

Schematic Diagrams and CBA’s

Electrical schematics and circuit board layouts for technical reference.

Exploded Views

Mechanical and Electrical Parts List

LASER BEAM SAFETY PRECAUTIONS

IMPORTANT SAFETY PRECAUTIONS

Safety Check after Servicing

Leakage Current Test

Verifies electrical safety by measuring current leakage.

STANDARD NOTES FOR SERVICING

PREPARATION FOR SERVICING

How to Enter the Service Mode

Instructions to access the equipment's service mode.

CABINET DISASSEMBLY INSTRUCTIONS

ELECTRICAL ADJUSTMENT INSTRUCTIONS

Head Switching Position Adjustment

Procedure to adjust the head switching position for optimal playback.

BLOCK DIAGRAMS <VCR SECTION>

Video Block Diagram

Audio Block Diagram

Power Supply Block Diagram

BLOCK DIAGRAMS <DVD SECTION>

DVD System Control; Servo Block Diagram

Diagrams showing DVD system control and servo functions.

Digital Signal Process Block Diagram

DVD Video; Audio Block Diagram

SCHEMATIC DIAGRAMS; CBA’S AND TEST POINTS

Main 2;8, Power SW & Sensor Schematic Diagram < VCR Section >

WAVEFORMS

WIRING DIAGRAM < VCR SECTION >

WIRING DIAGRAM < DVD SECTION >

SYSTEM CONTROL TIMING CHARTS

IC PIN FUNCTION DESCRIPTIONS

ELECTRICAL PARTS LIST

DECK MECHANISM SECTION

Standard Maintenance

Guidelines for routine maintenance and cleaning of the deck.

Mechanical Alignment Procedures

Steps to align gears and levers for proper tape transport.

Disassembly; Assembly Procedures of Deck Mechanism

Step-by-step guide for taking apart and reassembling the deck.

Deck Exploded Views

Deck Parts List

Cleaning

Cleaning of Video Head

Procedure to clean the video heads using a cleaning stick.

Cleaning of ACE Head

Procedure to clean the ACE head using a cotton swab.

MECHANICAL ALIGNMENT PROCEDURES

A. Method for Manual Tape Loading;Unloading

1. Tape Interchangeability Alignment

1-A. Preliminary;Final Checking and Alignment of Tape Path

1-B. X Value Alignment

1-C. Checking;Adjustment of Envelope Waveform

1-D. Azimuth Alignment of Audio;Control; Erase Head

1-E. Checking and Alignment of Tape Path during reversing

DISASSEMBLY;ASSEMBLY PROCEDURES OF DECK MECHANISM

ALIGNMENT PROCEDURES OF MECHANISM

DECK EXPLODED VIEWS

DECK PARTS LIST

Philips DVP3150V/37 Specifications

General

Brand	Philips
Model	DVP3150V/37
Category	DVD VCR Combo
Language	English