Philips E line 241E1SCA - Connecting to your PC

7
2. Setting up the monitor
Connecting to your PC
241E1SC/241E1C
5
4
3
1
2
AC/DC power input
HDMI input
VGA input
HDMI audio out
Kensington anti-theft lock
241E1SCA
1
6
5
4
3
2
AC/DC power input
HDMI input
VGA input
Audio input
Earphone jack
6
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the monitor firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.