8
2. Setting up the monitor
• MRPT is to adjust brightness for
blur reduction, so cannot adjust
brightness while MRPT is turned on.
• MPRT is gaming-optimized mode.
It is recommended to turn off
when you are not using the gaming
function.
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
2560 × 1440. When the monitor is
powered on at a different resolution, an
alert is displayed on screen: Use 2560 ×
1440 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20
Height adjustment
(275E2FE/275E2FAE)
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
To Next Page
Loading...
