5
2. Setting up the monitor
2. Setting up the
monitor
2.1 Installation
Package contents
AC/DC Adapter
* HDMI
* DP
Register your product and get support at
www.philips.com/welcome
Quick
Start
E Line
276E8
* Different according to region.
Note
Use only the AC/DC adapter model:
Philips ADPC2065
Install base stand
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen.
30mm
2. Hold the base stand with both
hands and firmly insert the base
stand into the base column.
(1) Gently attach the base to the base
column until the latch locks the
base.
(2) Use your fingers to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
2
1
To Next Page
Loading...
