Philips EarlyVue VS30 - Monitoring Temperature - Predictive

EarlyVue VS30 Instructions for Use 7-1
7
Monitoring Temperature —
Predictive
This chapter describes how to take a predictive temperature measurement with the
Welch Allyn SureTemp module on the EarlyVue VS30 monitor and how to change the
temperature settings. The predictive temperature system is supported for adult, pediatric,
and neonatal patients.
Connecting the Temperature Probe
Insert the temperature probe holder into the integrated probe well, then insert the
temperature probe into the holder. Insert a box of probe covers into the integrated probe
cover well.
Inserting probe holder
into probe well.
Inserting probe into probe
holder.
Probe covers
inserted
Probe holder and
probe inserted