Auto Set Alarm Limits
A-10 EarlyVue VS30 Instructions for Use
Auto Set Alarm Limits
The following tables list the formulas used for calculating Auto Set Alarm Limits. The
Auto Set Alarm Limits option is available in the Alarm Settings menu.
For Masimo auto set alarm limits, see the EarlyVue VS30 Masimo Vital Signs Monitor
Instructions for Use.
Adult/Pediatric Auto Set Alarm Calculations
SpO2 Low 0% – 99% 0% – 99% 0% – 99%
Temporal
Temperature
High
36.1°C – 42.9°C
(97.0°F – 109.2°F)
36.1°C – 42.9°C
(97.0°F – 109.2°F)
36.1°C – 42.9°C
(97.0°F – 109.2°F)
Temporal
Temperature
Low
16.1°C – 38.9°C
(61.0°F – 102.0°F)
16.1°C – 38.9°C
(61.0°F – 102.0°F)
16.1°C – 38.9°C
(61.0°F – 102.0°F)
Adult Pediatric Neonatal
Parameter Adult/Pediatric Lower Limit Adult/Pediatric Upper Limit
etCO2
(expired)
• 0 mmHg – 32 mmHg (0 kPa –
4.3 kPa): No change
• 32 mmHg – 35 mmHg (4.3 kPa –
4.7 kPa): 29 mmHg (3.9 kPa)
• 35 mmHg – 45 mmHg (4.7 kPa –
6.0 kPa): etCO2 – 6 mmHg (etCO2
– 0.8 kPa)
• 45 mmHg – 48 mmHg (6.0 kPa –
6.4 kPa): 39 mmHg (5.2 kPa)
• > 48 mmHg (6.4 kPa): No change
• 0 mmHg – 32 mmHg (0 kPa –
4.3 kPa): No change
• 32 mmHg – 35 mmHg (4.3 kPa –
4.7 kPa): 41 mmHg (5.5 kPa)
• 35 mmHg – 45 mmHg (4.7 kPa –
6.0 kPa): etCO2 + 6 mmHg (etCO2 +
0.8 kPa)
• 45 mmHg – 48 mmHg (6.0 kPa –
6.4 kPa): 51 mmHg (6.8 kPa)
• > 48 mmHg (6.4 kPa): No change
imCO2
(inspired)
No change 20 mmHg (2.7 kPa)
IPI Same as default alarm limit for Adult.
Not supported on Pediatric patients.
Same as default alarm limit for Adult. Not
supported on Pediatric patients.
NBP
Diastolic
Diastolic x 0.68 mmHg + 6 mmHg
Diastolic x 0.68 kPa + 0.8 kPa
Diastolic x 0.86 mmHg + 32 mmHg
Diastolic x 0.86 kPa + 4.3 kPa
NBP Mean Mean x 0.68 mmHg + 8 mmHg
Mean x 0.68 kPa + 1.1 kPa
MAP x 0.86 mmHg + 35 mmHg
MAP x 0.86 kPa + 4.7 kPa
NBP Systolic Systolic x 0.68 mmHg + 10 mmHg
Systolic x 0.68 kPa + 1.3 kPa
Systolic x 0.86 mmHg + 38 mmHg
Systolic x 0.86 kPa + 5.1 kPa
To Next Page
Loading...