EarlyVue VS30 Instructions for Use 2-25
Changing System Settings
Device Info Tab
On the Device Info tab of the System menu, you can view the following information
about your monitor:
• Serial Number: The monitor’s serial number, which also appears on the back of the
monitor. The serial number is configured in the factory.
• Hardware ID: The hardware versions for the main board and the front end board.
• Software Version: The software version installed on the monitor.
• LAN MAC Address: The unique MAC address assigned to the monitor. The MAC
address is configured in the factory.
• LAN IP Address: The IP address currently assigned to the monitor.
• LAN IPV6 Address: The IPV6 address currently assigned to the monitor (when
connected to an IPV6-enabled network).
• WLAN MAC Address: The unique wireless MAC address assigned to the monitor. The
MAC address is configured in the factory
• WLAN IP Address: The wireless IP address currently assigned to the monitor.
• WLAN IPV6 Address: The wireless IPV6 address currently assigned to the monitor
(when connected to an IPV6-enabled network).
• Language: The language currently configured on the monitor.
• Current Profile: The profile currently assigned to the monitor by your system
administrator. Profiles are sets of default settings for the monitor.
Your system administrator configures all of the above, except for the data configured at
the factory.
Note
The IP address is 0.0.0.0 until a network connection is established.
To Next Page
Loading...