EarlyVue VS30 Instructions for Use 3-35
Working with Patient Records
7 To close the patients list, touch the Close button at upper right.
You are returned to the main screen.
To open the Records menu and view a record in the Pending Records tab
1 Touch the Records button on the main screen.
2 In the Records menu that opens, touch the Pending Records tab.
Notes:
• If there are pending records (indicated by a red circle next to the Records
button), the Records menu opens with the Pending Records tab displayed by
default.
• If a QuickCheck workflow requires a validator ID, a Validator Login window
opens, requiring you to enter your credentials before the Pending Records tab
opens.
The Pending Records tab lists records with Unknown ID and/or records that require
validation.
3 Locate the record you want to view.
You can touch a column heading to sort the list according to that parameter.
If the record is not currently visible on the screen, use the scroll bar.
4 Touch the record to expand it and view detailed information.
5 When you are done viewing the detailed record, touch the up arrow at lower right of
the record to collapse it.
You are returned to the Pending Records tab.
6 To close the list, touch the Close button at upper right.
You are returned to the main screen.
Editing Patient Information
You can edit patient information, except Patient Type, for the current patient or for a
record in the Pending Records menu. You cannot edit records that have already been
saved with a primary ID, or have already been exported to the EMR.
You can edit patient information using a barcode scanner or the on-screen keyboard. Use
the same method you used when you admitted the patient. For more information, see
“Methods for Entering and Editing Patient Information” on page 3-13.
Editing Information for the Current Patient
To open the Edit Patient Menu for the current patient (if that patient has been assigned
a primary ID), touch the patient ID or patient type on the patient bar of the main screen,
then touch Edit.
To Next Page
Loading...