EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
5. Click Start Query.
6. Select Patient(s).
7. Click Retrieve to retrieve the data from the server.
Peripherals Tests
The following procedures test peripheral device operation.
To Test DVD Recorder Operation:
1. Set up the DVD recorder.
a. Turn on the DVD recorder with MAIN POWER on the rear
panel and the On/Off button on the front panel.
b. Press OPEN/CLOSE on the recorder front panel, insert a
disc, and press OPEN/CLOSE again.
2. Connect and initialize any transducer.
3. Acquire a PW Doppler image.
4. Touch Utilities.
5. Touch DVR (DVD recorder).
6. To format the disc, touch Format Status.
7. Touch and record several seconds of video.
8. Touch to pause the video.
9. Touch to stop the recording.
10. Touch to eject the disc.
11. View the DVD on a computer:
a. Play back the video and verify that the graphics and gray
bar on the display are in sharp focus and that the gray bar
displays the full range of gray shades as seen on the
monitor.
Note: If you enter an
asterisk (*) in the Last
Name field, the query
returns all exams in the
device. This may take a
large amount of time and
system resources.
Note: The DVD recorder
cannot be used to play
video on the system
monitor.
To Next Page
Loading...