Need help?Do you have a question about the Philips FA 960 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Power output | 80 watts per channel into 8Ω (stereo) |
| Frequency response | 10Hz - 100kHz (±1dB) |
| Total harmonic distortion | <0.01% (1kHz, 50W) |
| Damping factor | 60 |
| Input sensitivity | 0.25mV (MC), 2.5mV (MM), 150mV (line) |
| Dimensions | 430 x 120 x 360mm (W x H x D) |
| Weight | 10.5kg |
| Speaker load impedance | 4Ω to 16Ω |
| Input Impedance | 47kΩ |
Warning against opening the appliance to prevent electric shock.
Instructions to refer servicing to qualified personnel only.
Alerts users to the presence of uninsulated dangerous voltage.
Alerts users to important operating and maintenance instructions.
Essential safety guidelines for operating the amplifier.
Provides an introduction to the amplifier's capabilities.
Key points for safe and proper amplifier installation.
Details on connecting various audio sources and outputs to the amplifier.
Explains the purpose and operation of each front panel control.
Guide on selecting and playing audio from different sources.
How to use the CD DIRECT function for enhanced sound quality.
Instructions for using recorders for playback and recording.
Step-by-step guide for copying tapes between recorders.
Common issues and solutions for unsuccessful recordings.
Guidance on connecting and optimally placing speakers.
Information on cleaning and servicing the amplifier.
Lists detailed technical performance metrics of the amplifier.
To Next Page
