FC9728/01 /61 /71
13-19
• Take out Light box cover (25) and Light box (24) (both
are not screwed).
• Unscrew the 6 screws (D) to remove Back housing assy
(26) including Handle (23).
• Pull the Back housing upwards with force.
• Disconnect the wires coming from the handle
(2 connectors).
• If necessary Valve assy (27) can be replaced.
• Remove the Cordwinder lever (38).
• Disconnect the wires from the PCB, unscrew the 2 scews
(J) to remove PCBA (36).
• Remove Cordwinder cover (34).
• Unscrew the 4 screws (E) to remove the Motor housing.
Two on top of the Motor housing and 2 from the bottom
of the appliance.
Disassembly- and Reassembly advice
To Next Page
Loading...
