Philips FW-C100/21 - Tape Recording Functions

2-9
SPR 00 0012
21
English
Recording
DIGITAL SOUND CONTROL
STANDBY
-
ON
PROGRAM CLOCK
•
TIMER
FULL AUTO STOP
MASTER
VOLUME
PLAYBACK
PLAY/REC
PLAY
STOP
.
OPEN
PAU
SE
▲
RECORD
P
LAY
STOP
.
OPE
NPAUS
E
▲
▲
▲
▲
MINI HIFI SYSTEM
CD1 • 2 • 3
TAPE 1 • 2
CD TUNER
AUX
PRESET
▲
▲
TUNING
▲
▲
▲
▲
STOP• CLEAR
SEARCH
PLAY• PAUSE PREV NEXT
VIDEO
O
P
T
I
M
A
L
J
A
Z
Z
R
O
C
K
T
E
C
H
N
O
DSC
▲
▲
▲
▲
▲
▲
DYNAMIC BASS BOOST
BAND
TAPE
TAPE 1
TAPE 2
DEMO STOP
2
21
3
TUNERTAPE 1/2CD
SLEEPAUXDIM
DSC DBB
MUTE
REPEAT
PAUSE
SHUFFLE
Å
CD DIRECT
VOLUME
á
à
ë
í
É
Ç
Notes: –For recording, use only tape of IEC type I (normal tape). – The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds. – The recording level is set automatically, regardless of the position of Volume, DBB or DSC. –To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
One Touch Recording
● For One Touch Recording, as soon as you press
RECORD, the current source (CD, TUNER or AUX) will be recorded on tape deck 1.
1
Load a blank tape in tape deck 1.
2
Press RECORD on tape deck 1 to start recording. ➜ The
REC
starts flashing.
3
Press PAUSE to interrupt recording.
4
Press STOP•OPEN on tape deck 1 to stop recording.
22
English
CD Synchro Start Recording During CD synchro start recording,
¶ Do not fast forward/rewind your tape in tape
deck 2.
1
Load a blank tape into tape deck 1 and a disc into the disc tray.
2
Press CD.
¶ You can program the tracks in the order you
want them to be recorded (see Programming Tracks). If you do not, the tracks are recorded according to the order on the selected disc.
3
Press RECORD on tape deck 1 to start recording. ➜ The
REC
starts flashing.
4
Press STOP•OPEN on tape deck 1 to stop recording, then press Ç to stop CD playback. Dubbing tapes
(from tape deck 2 to tape
deck 1)
1
Load the prerecorded tape into tape deck 2 and a blank tape into tape deck 1.
¶ Make sure both tapes have their full spool to the
left.
2
Press PAUSE on tape deck 1.
3
Press RECORD on tape deck 1. ➜ The
REC
starts flashing.
4
Press PLAYÉ on tape deck 2.
¶ Recording will start automatically.
5
Press STOP•OPEN on tape deck 1 and tape deck 2 to stop dubbing.
Notes: – At the end of side A, flip the tapes to side B and repeat the procedure. – Dubbing of tapes is only possible from tape deck 2 to tape deck 1. –To ensure good dubbing, use tapes of the same length.
Recording from other sources (only on tape deck 1)
1
Load a blank tape into tape deck 1.
2
Press CD, TUNER or AUX.
¶ Start playback of the selected source.
3
Press RECORD on tape deck 1 to start recording. ➜ The
REC
starts flashing.
4
Press PAUSE to interrupt recording.
5
Press STOP•OPEN on tape deck 1 to stop recording. Note: – During recording, it is not possible to listen to another sound source.
Recording