Controls (illustrations on page 3)
Controls on the system and
remote control
1 STANDBY ON y
– to switch the system on or to standby mode.
2 Display screen
– to view the current status of the system.
3 Disc tray
4 DISC CHANGE
– to change disc(s).
5 OPEN•CLOSE
– to open or close the disc tray.
6 DISC 1/2/3 (CD DIRECT 1/2/3)
– to select a disc tray for playback.
7 Source selection – to select the following :
CD (CD 1•2•3)
– to select disc tray 1, 2 or 3.
TUNER (BAND)
– to select waveband : FM, MW or LW.
TAPE (TAPE 1•2)
– to select tape mode.
AUX (VIDEO)
– to select the input for an additional appliance.
8 Mode Selection
à á SEARCH (TUNING à á)
for CD ................. to search backward/forward.
for Tuner ............. to tune to a lower or higher
radio frequency.
for Clock ............ (on the system only) to set the
hour.
Ç STOP•CLEAR (DEMO STOP)
for CD ................. to stop playback or to clear a
programme.
for Tuner ............. (on the system only) to stop
programming.
for Demo ........... (on the system only) to activate/
deactivate the demonstration.
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
for Plug & Play…(on the system only) to exit plug
& play mode.
ÉÅ PLAY•PAUSE
for CD ................. to start or interrupt playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
í PREV / ë NEXT (4 PRESET 3)
for CD ................. to skip to the beginning of the
current, previous, or next track.
for Tuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
9 MASTER VOLUME 34
(VOLUME +/-)
– to increase or decrease the volume.
0 n
– to connect headphones.
! DYNAMIC BASS BOOST (DBB)
– to activate/deactivate bass boost.
@ CLOCK•TIMER
– to view the clock, set the clock or set the timer.
# Tape deck 2 operation
PLAYÉ ........... to start playback.
à / á ............... to rewind or fast forward.
STOP•OPEN …to stop playback or to open
the tape door.
PAU SE .............. to interrupt playback.
$ Tape deck 1 operation
RECORD ........ to start recording.
PLAYÉ ........... to start playback.
à / á ............... to rewind or fast forward.
STOP•OPEN…to stop playback/recording or
to open the tape door.
PAU SE .............. to interrupt playback or
recording.
% PROG
for CD ................. to programme disc tracks.
for Tuner ............. to programme preset radio
stations.
for Clock ............ to select 12- or 24-hour clock
mode.
^ DSC (DIGITAL SOUND CONTROL)
– to select the desired sound effect :
OPTIMAL, JAZZ, ROCK or TECHNO.
pg 001-026/C115/22-Eng 12/24/01, 9:39 AM10
To Next Page
Loading...
