Philips FW-C115/22 - Dubbing Tapes; External Sources; Listening to External Sources

21
English
3139 115 21361
Tape Operation / Recording
Dubbing tapes
1 Load the prerecorded tape in tape deck 2.
● Make sure both tapes have their full spool to the
left.
2 Press PAUSE on tape deck 1 and followed by
RECORD.
3 Press PLAYÉ on tape deck 2.
➜ Recording will start automatically.
● Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat the procedure.
To stop dubbing
● Press STOP•OPEN on tape deck 1 and 2.
Notes:
– Dubbing of tapes is possible only from tape
deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of the same
length.
Listening to external sources
1 Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX IN
terminals of your system.
2 Press AUX to select external equipment.
➜ "AUX" is displayed.
External Sources
S
TANDBY
O
N
MA
S
VOL
U
CD1 • 2 • 3
TAPE 1 • 2
TAPECD TUNER
AUX
STOP• CLEAR
SEARCH
PLAY• PAUSE PREV NEXT
VIDEO
A
L
BAND
Note:
– All the sound control features (DSC or DBB, for
example) are available for selection.
For Recording, please refer to “Tape
Operation/Recording”.
pg 001-026/C115/22-Eng 12/24/01, 9:40 AM21