12
English
8239 300 17762
Controls (illustrations on page 3)
Controls on the system and
remote control
1 STANDBY ON y
– to switch the system on or to standby mode.
2 TAPE (TAPE 1•2)
– to select tape mode.
3 TUNER (FM•AM)
– to select waveband : FM or AM.
4 CD 1 / CD 2 / CD 3 (CD 1/2/3)
– to select disc tray 1, 2 or 3.
5 DSC (DIGITAL SOUND CONTROL)
– to select the desired sound effect :
JAZZ, ROCK, TECHNO or OPTIMAL.
6 OPEN/CLOSE
– to open or close the disc tray.
7 DISC CHANGE
– to change disc(s).
8 DBB (DYNAMIC BASS BOOST)
– to select the desired bass boost level.
9 PROGRAM
for CD ................. to program disc tracks.
for Tuner ............. to program preset radio stations.
for Clock ............ to select 12- or 24-hour clock
mode.
for Timer ............. to select CD program mode as
the wake up source.
0 Tape deck 1 operation
â .......................... to start recording.
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback/recording or to
open the tape door.
Å .......................... to interrupt playback or
recording.
! Tape deck 2 operation
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback or to open the
tape door.
Å .......................... to interrupt playback.
@ CLOCK•TIMER
– to view the clock, set the clock or set the timer.
# DIM MODE (DIM)
– to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
$ n
– to connect headphones.
% MASTER VOLUME v w (VOL +/-)
– to increase or decrease the volume.
^ Mode Selection
PLAY•PAUSE ÉÅ
for CD ................. to start or interrupt playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
SEARCH•TUNING à á
for CD ................. to search backward/forward.
for Tuner ............. to tune to a lower or higher
radio frequency.
for Clock ............ (on the system only) to set the
hour.
STOP•CLEAR / DEMO STOP Ç
for CD ................. to stop playback or to clear a
program.
for Tuner ............. (on the system only) to stop
programming or to erase a
selected preset.
for Demo ........... (on the system only) to activate/
deactivate the demonstration.
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
for Plug & Play…(on the system only) to exit plug
& play mode.
PREV í / PRESET 4
NEXT ë / PRESET3
for CD ................. to skip to the beginning of the
current, previous, or next track.
for Tuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
& Display screen
– to view the current status of the system.
* Disc tray
( REPEAT
– to playback track(s)/disc(s)/program repeatedly.
) SHUFFLE
– to playback all available discs and their tracks/
program in random order.
¡ MUTE
– to interrupt or resume sound reproduction.
™ SLEEP
– to activate/deactivate or set the sleep timer.
£ B
– to switch the system to standby mode.
pg 001-029/C155/37-Eng 11/23/01, 2:07 PM12
To Next Page
