20
English
3139 115 20433
Continuous Playback From Tape
Deck 2 to Tape Deck 1
1 Press TAPE to select TAPE mode.
2 Load the tapes in tape deck 1 and 2.
3 Press PLAY 2 on tape deck 2.
4 Press PAUSE on tape deck 1.
5 Press PLAY 2 on tape deck 1.
➜ Playback will begin with tape deck 2 and will
continue with tape deck 1 when playback on
tape deck 2 ends.
6 Press STOP•OPEN if you want to stop
playback before the end of the tape in tape deck
1 or tape deck 2.
Notes:
– During rewinding or fast forwarding of a tape, it
is also possible to listen to another source (e.g. CD,
TUNER or AUX).
– Before playing a tape, check and tighten slack
tape with a pencil. Slack tape may get jammed or
may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not recommended for
use in this system.
– Store the tapes at room temperature and do not
put them too close to a magnetic field (for
example, a transformer, TV or speaker).
.
Ta p e
pg 01-28/C250/21-Eng 29/05/2001, 10:26 AM20
To Next Page
Loading...
