Philips FW C255 - Controls; System and Remote Control Functions

10
English
3139 115 21251
Controls (illustrations on page 3)
Controls on the system and
remote control
1 STANDBY ON B
– to switch the system on or to standby mode.
2 SLEEP
– to activate/deactivate or set the sleep timer.
3 DIGITAL SOUND DISPLAY
– the active DSC will be lighted.
4 TUNER (BAND)
– to select waveband : FM or MW.
TAPE (TAPE 1•2)
– to select tape mode.
AUX (VIDEO) (AUX/CDR)
– to select the input for an additional appliance.
5 CD 1 / CD 2 / CD 3 (CD 1/2/3)
– to select disc tray 1, 2 or 3.
6 OPEN/CLOSE
– to open or close the disc tray.
7 DISC CHANGE
– to change disc(s).
8 DIGITAL SOUND CONTROL (DSC)
– to activate the jog control for DSC selection.
9 Jog control
– to select the desired sound effect for the
selected sound feature.
DSC .................. JAZZ, ROCK, TECHNO or
OPTIMAL.
DBB ..................DBB 1, DBB 2, DBB 3 or DBB
OFF.
0 DYNAMIC BASS BOOST (DBB)
– to activate the jog control for DBB selection.
! PROGRAM
for CD ................. to programme disc tracks.
for Tuner ............. to programme preset radio
stations.
for Clock ............ to select 12- or 24-hour clock
mode.
for Timer ............. to select CD programme mode
as the wake up source.
@ Tape deck 1 operation
â .......................... to start recording.
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback/recording or to
open the tape door.
Å .......................... to interrupt playback or
recording.
# Tape deck 2 operation
É .......................... to start playback.
à / á ............... to rewind or fast forward.
70 ........................ to stop playback or to open the
tape door.
Å .......................... to interrupt playback.
$ CLOCK/TIMER
– to view the clock, set the clock or set the timer.
% DIM MODE
– to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
pg 001-028_255_21-Eng 12/24/01, 10:56 AM10