3-2
3-2
PCS 103 460
Dismantling of Assemblies on the Front Panel
1) Remove the Volume knobs (pos 146) as per step 1 of
Dismantling of the Cover Control on the Front
.
2) Remove 3 screws C to loosen the Headphone board (1x)
and the Karaoke borad (2x).
Note: Karaoke board is for some version only.
3) Remove 12 screws D as indicated to loosen the Front
board.
4) Remove 6 screws E to loosen the ETF7 Module.
Dismantling of Rear Portion
1) Remove 1 screw H & uncatch C1 to loosen the Mains
socket board.
2) Remove 2 screws F, 2 screws G and uncatch C2 to
loosen the Tuner board assembly.
3) Remove 5 screws J (3x on the rear and 2x on the
heatsink) to loosen the Combi board (Main part).
4) Remove 2 screws K to loosen the Mains Transformer.
To Next Page
Loading...
