Philips FW-C30/21 - System Specifications; Amplifier Specifications; Tape Deck Specifications; Speaker Specifications

3139 116 19351
22
English
Specifications
AMPLIFIER
Output power
PMPO .................................................................. 1000 W
RMS
(1)
................................................................ 2 x 35 W
Signal-to-noise ratio ..................................... ≥ 67 dBA (IEC)
Frequency response .......................... 50 – 15,000 Hz, ± 3dB
Input sensitivity
AUX In ............................................................... 700 mV
Microphone (not available for version /30) ...... 3.5 mV
Output
Speakers ................................................................ ≥ 6 Ω
Headphones ............................................ 32 Ω – 1000 Ω
Subwoofer ............................................................... 1.5 V
(1) (6
Ω,
1kHz, 10% THD)
CD PLAYER
Number of programmable tracks ..................................... 40
Frequency response ..................................... 20 – 20,000 Hz
Signal-to-noise ratio .............................................. ≥ 80 dBA
Channel separation ..................................... ≥ 60 dB (1 kHz)
Total harmonic distortion ..................................... < 0.003%
TUNER
FM wave range ........................................... 87.5 – 108 MHz
MW wave range (9 kHz) .............................. 531 – 1602 kHz
MW wave range (10 kHz) ............................ 530 – 1700 kHz
Tuning grid ............................................................. 9/10 kHz
Number of presets ............................................................ 40
Antenna
FM .................................................................... 75 Ω wire
AM .............................................................. Loop antenna
TAPE DECK
Frequency response
Normal tape (type I) ...................... 80 – 12,500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ..........................................≥ 48 dBA
Wow and flutter ................................................≤ 0.4% DIN
SPEAKERS
System ................................ 2 way; double port bass reflex
Impedance ..................................................................... 6 Ω
Woofer .................................................................... 1 x 5.25"
Tweeter ..................................................................... 1 x 2.5"
Dimensions (w x h x d) ........................ 210x 310x 240 (mm)
Weight .............................................................. 2.9 kg each
GENERAL INFORMATION
Material ............................................................. Polystyrene
AC Power
For Version /21........................... 110 - 127 / 220 - 240 V;
.................................................... 50/60Hz; Switchable
For Version /30................................... 230 - 240 V; 50 Hz
Power Consumption
Active ..................................................................... 70 W
Standby ................................................................ < 15 W
Dimensions (w x h x d) ........................ 265x 310x 340 (mm)
Weight (without speakers) ......................................... 6.6 kg
Subject to modification
SPECIFICATIONS
pg 01-24/C30/21&/30-En 3/3/00, 4:23 PM22