Philips FW-C355 - External Sources; Listening to External Sources

26
English
3139 115 21341
2 When you reach the desired length of time, stop
pressing the SLEEP button.
➜ is shown, except for "OFF" mode.
➜ The sleep timer is now set. Before the system
switches to standby mode, a countdown of 10
seconds is displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
To check the remaining length of time
after sleep timer is activated
● Press SLEEP once.
To change the preset sleep timer
● Press SLEEP again while the remaining sleep
timer is shown.
➜ The display will show the next sleep timer
options.
Clock/Timer
To deactivate the sleep timer
● Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY ON button.
Listening to external sources
1 Connect the audio out terminals of the external
equipment (TV, VCR, Laser Disc player, DVD
player or CD Recorder) to the AUX/CDR IN
terminals of your system.
2 Press AUX (or AUX/CDR on the remote
control) to select external equipment.
➜ "AUX" is displayed.
External Sources
TUNER TAPE
BAND
TAPE 1 • 2 VIDEO
DIGITAL SOUND DISPLAY
DSC
O
P
T
I
M
A
L
J
A
Z
Z
T
E
C
H
N
O
R
O
C
K
CD 1 CD 2 CD 3
R
O
L
D
AUX
Notes:
– All the sound control features (DSC or DBB, for
example) are available for selection.
– Refer to the operating instructions for the
connected equipment for details.
For Recording, please refer to “Tape
Operation/Recording”.
pg 001-029/C355/22-Eng 4/16/02, 5:24 PM26