To Next PageTo Next Page
Need help?Do you have a question about the Philips FW-C380/34 and is the answer not in the manual?
Setup for FM tuner measurements.
Setup for AM tuner measurements.
Measurement setup for CD playback.
Measurement setup for tape recording.
Tools required for service and repair.
Equipment for preventing electrostatic discharge damage.
Procedures for removing chip components.
Procedures for installing chip components.
Warnings about electrostatic discharge (ESD) and handling.
Requirements for restoring the set to its original condition.
Warning about laser safety when open.
Crucial safety precautions before operating.
Connecting external devices to the rear panel.
How to install batteries in the remote.
Connecting the system to the power outlet.
Automatic radio station storage and RDS time setting.
Steps to power on the system.
How to choose between CD, TUNER, TAPE, AUX.
Using DSC, VEC, Optimal Sound Mix for audio tuning.
How to insert discs into the changer.
Starting and pausing disc playback.
Navigating and selecting tracks on a disc.
Creating custom playback sequences.
Repeating tracks, discs, or the entire program.
Manual and automatic tuning methods.
Saving favorite radio stations.
Using Radio Data System features.
Inserting a cassette tape into the deck.
Starting and stopping tape playback.
Navigating tape content.
Connecting and selecting external audio devices.
Simple recording from a source to tape.
Recording CDs to tape automatically.
Copying tapes from one deck to another.
Displaying the current time.
Setting the system's clock.
Setting the system to turn on at a specific time.
Setting the system to turn off automatically.
Common issues and their solutions.
Troubleshooting unresponsive controls.
Solutions for remote control issues.
Features related to microphone input and mixing.
Changing MW tuning grid and FM tuning grid.
Removing the CD changer and front panel.
Service position A for repair.
Service position B for repair.
Service position C for repair.
Service position D for repair.
List of error codes and their descriptions.
Test functions and their actions.
Component placement on the front board.
Schematic of the front board circuitry.
Differences in front board components across versions.
Circuit diagram for the headphone part.
Chip placement on the karaoke board.
List of miscellaneous parts for the front board.
List of capacitors for the front board.
List of resistors for the front board.
Block diagram of the ECO6 Tuner Board.
Electrical schematic of the ECO6 Tuner Board.
Tuning and adjustment parameters for the ECO6 Tuner Board.
Block diagram of the ECO6 Tuner Board (Cenelec).
Electrical schematic of the ECO6 Tuner Board (Cenelec).
Tuning and adjustment parameters for the ECO6 Tuner Board (Cenelec).
Wiring and variation details for the tape module.
Block diagram of the tape module.
Pin assignments for module connectors.
Servo circuit schematic for tape control.
Visual breakdown and parts listing for the tape module.
Important notes for servicing the CD changer.
Wiring diagram for the CD changer.
Block diagram of the CD changer.
Component placement on the CD changer main board.
Schematic of the CD changer circuitry (Part 1).
Visual breakdown of the CD changer module.
Important notes for servicing the CD changer module.
Wiring diagram for the CD changer module.
Block diagram of the CD changer module.
Component placement on the CD changer main board.
Schematic of the CD changer circuitry (Part 1).
Visual breakdown of the CD changer module.
Overview of the power module's circuit.
Block diagram of the power board and P2001 board.
Schematic of the mains part circuitry.
Schematic of the power part circuitry.
Overview of the AF9 board features and ICs.
Component placement on the AF9 board.
Schematic of the AF9 board circuitry (Part 1).
Schematic of the AF9 board circuitry (Part 2).
List of electrical parts for the AF9 board.
List of screws used in the main unit.
Setup for FM tuner measurements.
Setup for AM tuner measurements.
Measurement setup for CD playback.
Measurement setup for tape recording.
Tools required for service and repair.
Equipment for preventing electrostatic discharge damage.
Procedures for removing chip components.
Procedures for installing chip components.
Warnings about electrostatic discharge (ESD) and handling.
Requirements for restoring the set to its original condition.
Warning about laser safety when open.
Crucial safety precautions before operating.
Connecting external devices to the rear panel.
How to install batteries in the remote.
Connecting the system to the power outlet.
Automatic radio station storage and RDS time setting.
Steps to power on the system.
How to choose between CD, TUNER, TAPE, AUX.
Using DSC, VEC, Optimal Sound Mix for audio tuning.
How to insert discs into the changer.
Starting and pausing disc playback.
Navigating and selecting tracks on a disc.
Creating custom playback sequences.
Repeating tracks, discs, or the entire program.
Manual and automatic tuning methods.
Saving favorite radio stations.
Using Radio Data System features.
Inserting a cassette tape into the deck.
Starting and stopping tape playback.
Navigating tape content.
Connecting and selecting external audio devices.
Simple recording from a source to tape.
Recording CDs to tape automatically.
Copying tapes from one deck to another.
Displaying the current time.
Setting the system's clock.
Setting the system to turn on at a specific time.
Setting the system to turn off automatically.
Common issues and their solutions.
Troubleshooting unresponsive controls.
Solutions for remote control issues.
Features related to microphone input and mixing.
Changing MW tuning grid and FM tuning grid.
Removing the CD changer and front panel.
Service position A for repair.
Service position B for repair.
Service position C for repair.
Service position D for repair.
List of error codes and their descriptions.
Test functions and their actions.
Component placement on the front board.
Schematic of the front board circuitry.
Differences in front board components across versions.
Circuit diagram for the headphone part.
Chip placement on the karaoke board.
List of miscellaneous parts for the front board.
List of capacitors for the front board.
List of resistors for the front board.
Block diagram of the ECO6 Tuner Board.
Electrical schematic of the ECO6 Tuner Board.
Tuning and adjustment parameters for the ECO6 Tuner Board.
Block diagram of the ECO6 Tuner Board (Cenelec).
Electrical schematic of the ECO6 Tuner Board (Cenelec).
Tuning and adjustment parameters for the ECO6 Tuner Board (Cenelec).
Wiring and variation details for the tape module.
Block diagram of the tape module.
Pin assignments for module connectors.
Servo circuit schematic for tape control.
Visual breakdown and parts listing for the tape module.
Important notes for servicing the CD changer.
Wiring diagram for the CD changer.
Block diagram of the CD changer.
Component placement on the CD changer main board.
Schematic of the CD changer circuitry (Part 1).
Visual breakdown of the CD changer module.
Important notes for servicing the CD changer module.
Wiring diagram for the CD changer module.
Block diagram of the CD changer module.
Component placement on the CD changer main board.
Schematic of the CD changer circuitry (Part 1).
Visual breakdown of the CD changer module.
Overview of the power module's circuit.
Block diagram of the power board and P2001 board.
Schematic of the mains part circuitry.
Schematic of the power part circuitry.
Overview of the AF9 board features and ICs.
Component placement on the AF9 board.
Schematic of the AF9 board circuitry (Part 1).
Schematic of the AF9 board circuitry (Part 2).
List of electrical parts for the AF9 board.
List of screws used in the main unit.
General| Brand | Philips |
|---|---|
| Model | FW-C380/34 |
| Category | Micro Music System |
| Language | English |
