19
English
3139 115 20561
Note:
– The program will be erased when the system is
disconnected from the power supply or when the
disc tray is opened.
Repeat
The current track, a disc, all available discs or all
programmed tracks can be played repeatedly.
1 Press REPEAT on the remote control
repeatedly to select various repeat modes.
● In normal playback
➜ "TRACK" – to repeat the current track.
"DISC" – to repeat the entire disc.
"ALL DISC" – to repeat all available discs.
➜ RPT appears on the display.
● In program playback
➜ "TRACK" – to repeat the current
programmed track.
"PROGRAM" – to repeat all programmed
tracks.
➜ RPT and PROG will appear on the display.
● The selected track/disc(s)/program will now be
played repeatedly until you press Ç.
2 To resume normal playback, press REPEAT
until the "OFF" mode is displayed.
➜ RPT will disappear from the display.
Note:
– Selecting SHUFFLE during repeat playback will
cancel all repeat modes.
Shuffle
All the available discs and their tracks or all the
programmed tracks can be played in random
order.
1 Press SHUFFLE on the remote control.
➜ "SHUFFLE" and SHUFF will appear on the
display.
● The discs and the tracks will be played in
random order until you press Ç.
2 To resume normal playback, press SHUFFLE
again.
➜ SHUFF will disappear from the display.
CD Operation
When REPEAT is selected during
shuffling
● In normal shuffled playback
➜ "TRACK" and "ALL DISC" repeat modes are
available for selection.
➜ RPT and SHUFF will appear on the
display.
● In program shuffled playback
➜ "TRACK" or "PROGRAM" repeat modes are
available for selection.
➜ RPT , SHUFF and PROG will appear on the
display.
For Recording, please refer to “Tap e
Operation/Recording”.
pg 001-030/C500-C550/37-Eng 12/8/00, 1:58 PM19
To Next Page
Loading...
