@
VCD operations (for VCD version 2.0 only)
PBC
– to switch on or off the playback control mode.
RETURN
– to return to the previous menu level during
playback (for VCD with PBC switched on).
#
Tape deck 1
$
Tape deck 2
%
Tape deck operations
A. REPLAY
– to select continuous playback in either AUTO
REPLAY or ONCE mode only.
RECORD
– to start recording on tape deck 2.
^
PROG
for CD/VCD/MP3-CD…to programme disc
tracks.
for Tuner ............. to programme preset radio
stations.
for Clock ............ to select 12- or 24-hour clock
mode.
&
CLOCK•TIMER
– to view the clock, set the clock or set the timer.
*
DIM
– to select different brightness for the display
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.
(
n
– to connect headphones.
)
MIC
– to connect microphone jack.
¡
MIC LEVEL
– to adjust the mixing level for karaoke or
microphone recording.
™
MASTER VOLUME (VOLUME +/-)
– to increase or decrease the volume.
£
Display screen
– to view the current status of the system.
Disc tray
VCD operations (on remote control only)
OSD
– to switch on or off the On Screen Display on
the TV.
ZOOM
– to enlarge a still picture of the VCD on the TV
screen.
RESUME
– to continue playback again from where you have
stopped (for VCD with PBC switched off).
VOCAL
– to fade out the original vocal from a Karaoke
VCD or to switch between mono or stereo
mode during audio disc playback.
KEY CONTROL ( I È i )
– to change the VCD key tone level to suit your
vocal range.
I ........................... to decrease the key tone level.
È .............................. to restore the key tone level to
original setting.
i ............................. to increase the key tone level.
ECHO -/+
–
to adjust the VCD echo level for karaoke after
inserted the microphone.
SLOWÖ
– to watch the VCD at a slower speed.
A - B
– to playback a certain scene or passage of a CD/
VCD repeatedly.
DIGEST
–
to scan through a VCD or a specific track.
§
IS (not functional for this model
)
Controls
24
25
Controls
Notes for remote control:
–
First select the source you wish to contr
ol
by pressing one of the source select keys on
the remote control (for example TAPE 1/2,
TUNER).
– Then select the desired function (for
example
É
,
í
,
ë
).
REPEAT
– to playback track/disc/programme repeatedly.
•
Numeric keys (0 – 9)
(numbers consisting more than two figures must be
keyed in within 2 seconds.)
– to direct key in a track number for
CD/VCD/MP3-CD.
ª
B
– to switch the system to standby mode.
27
To Next Page
Loading...
