15
English
CD CD RECORDER
General Information
• With your Philips CD Recordable/
ReWritable Recorder, you can record,
play and erase your own high-quality
audio CDs, subject to legal restrictions
on copying. Naturally, you will also be
able to play all pre-recorded audio CDs.
• For recording use, special audio discs
must be used (for music only). These
discs bear the logos as shown below.
The text ‘DIGITAL AUDIO’ is present!
–
CD-Audio Recordable
(CDR) discs:
fully
recorded and finalized,
these discs play on all
CD players and recorders.
–
CD-Audio ReWritable (CDRW) discs:
can be recorded,
erased and re-
recorded hundreds of
times. When finalized,
they play on CDRW compatible CD
players and recorders. In the course
of 1999 most Philips CD players and
recorders will be CDRW compatible.
• To ensure proper working of the set we
recommend the use of Philips audio CDR
and audio CDRW discs only.
• Your CD Recorder is able to playback all
audio CD, finalized audio CD-
Recordable and finalized audio CD-
Rewritable format discs.
Accessories
(Supplied)
– 2 Analog audio cables (with red and
white plugs)
– 1 Digital coaxial cable (with black plugs)
– Power cord
DISPLAY indications
1 REM/REC TIME
– remaining recording time/recording
time.
2 TRACK
– track number.
3 FE
– balance (lights up during balance
adjustement).
4 TOTAL REM TRACK TIME
– total or remaining time of disc or track.
5 }
– remote control active.
6 STEP
– indicates the number of tracks in a
program.
7 Track bar
– indicates tracks on a disc or in a
program.
– indicates track in playback.
8 + 20
– disc or program contains more than 20
tracks.
9 SCAN
– lights up when the first 10 seconds of
each track are played.
0 REPEAT TRACK/ALL
– lights up when a track/complete disc
(or program) is repeated.
! SYNC
– synchronized recording active.
@ SHUFFLE ALL
– plays tracks in random order.
# MANUAL
– manual recording active.
$ L/R ; ;
– record/play level bar, indicates the
audio signal level.
% PROGRAM
– flashes during programming/lights in
program mode.
^ ;
– pause function active.
& B
– lights up during playback.
* 0
– lights up during recording.
( RW
– unfinalized CDR(W) disc inserted.
) CD
– CD inserted (a pre-recorded CD or
finalized CDR or CDRW disc).
Shuffle
(only on remote control)
It will play all the available discs and their
tracks in random order. Shuffle may also be
used when tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ “SHUFFLE” will be displayed.
™ The SHUFFLE flag, the disc and the
track selected at random appear on
the display.
• The discs and the tracks will now be
played in random order until you press
STOP•CLEAR Ç.
• If you press REPEAT during shuffling,
the current track will be played
repeatedly.
™ The REPEAT and SHUFFLE flags will
be displayed.
2 Press SHUFFLE again to resume normal
playback.
™ The SHUFFLE flag disappears from
the display.
To Next Page
Loading...
