24
English
News
(only available in Radio Station
with RDS)
You can activate NEWS function in Standby
or any source mode except Tuner mode.
Once the News PTY (program type) is
detected in a RDS station, it will switch to
TUNER mode automatically.
To start NEWS function
1 Press NEWS.
• The NEWS flag and "NEWS ON" will be
displayed.
• It will search for the first available RDS
station in the presets and wait for the
News PTY (program type) to be
available. During News PTY search :
™ If NEWS activate from Standby or
Demo mode, the display will show
"WAITING FOR NEWS".
™ If NEWS is activated from CD, Tape
or Aux mode, the current source
activity will be remain uninterrupted.
™ If no RDS station is found after the
search, the News function will be
switched off. The display will show
"NO RDS NEWS" and NEWS flag
will disappear from the display.
Loading a tape
• Press OPEN.
• The tape deck door opens.
• Load the tape with the open side
downward and the full spool to the left.
• Close the tape deck door.
TUNER TAPE
• When News transmission is detected,
the system will switch to Tuner mode.
™ The NEWS flag starts flashing.
• After News has ended, the last selected
source mode will be resumed.
™ The NEWS flag will disappear from
the display.
To cancel NEWS function
• Press NEWS again.
™ The NEWS flag disappears and
"NEWS OFF" will be displayed.
Notes:
– During NEWS bulletin, you can press
any available source button to cancel
NEWS function and execute the
relevant source mode.
– The NEWS works only once for each
activation.
– If NEWS is activated from Standby or
Demonstration mode, it switches to
Tuner mode and the sound will be muted
until News is available.