3-1 3-1
DISASSEMBLY INSTRUCTIONS (MAIN UNIT )
Figure 5
Dismantling of the Main Board
1) Release 1 screw " E " at the side of main board as figure 5.
2) Loosen 1 screw "F" at the main heat sink board as figure 6.
Dismantling of the Power Board
1) Loosen 4 screws " G " to remove the Power Board as figure 7.
2) Remove the catch "H" using cutter as shown in figure 8.
Figure 1
Figure 6
Figure 2
Dismantling of the back panel & DVD Module
1) Loosen 6 screws at both slide cover "A" shown as figure 1 and 8 screws at back panel to take out the top cover.
2) Loosen 18 screws "B " at the back panel as figure 2.
3) Loosen 4 screws "C " to take out DVD module cover as figure 3.
4) Loosen 4 screws "D " to take out DVD module as figure 4.
Figure 4
Figure 7
Figure 8
Figure 3
A
B
C
F
E
G
H
D
To Next Page
Loading...
