Philips FWP3200D - Unit Disassembly and Service Positions; Component Disassembly Procedures

15EN
Play from USB
Note
•
Make sure that the USB device contains playable audio
content.
1 Insert a USB mass storage device into the
socket on either the left (A) or the
right (B).
2 Press SOURCE repeatedly to select the
USB source.
» Play starts automatically.
Play options
Repeat and shufe play
• Press MODE repeatedly to select:
•
-1 (repeat one): play the current
track repeatedly.
•
(repeat all): play all tracks
repeatedly.
•
(shufe):playalltracksrandomly.
•
(repeatshufe):playalltracks
repeatedly in random order.
• None: resume normal play.
Listen through headphone
Note
•
When you listen and monitor through a headphone,
the loudspeaker of the unit will be not muted.
1 Plug a headphone into the socket on the
top panel.
2 Depending on which audio source you
want to listen to, switch
OUTPUT to
the left (A) or right (B).
3 Use VOL to adjust the monitor
headphone volume.