Philips FWT6600 - Other Features; Set the Alarm Timer; Set the Sleep Timer; Karaoke

21EN
11 Other features
Set the alarm timer
This music system can be used as an alarm
clock. You can select disc, radio or USB as alarm
source.
Note
• If you have set a record timer and an alarm timer, only
the latest timer shall be activated.
1 Ensure that you have set the clock
correctly.
2 Press to switch to standby mode.
3 Press and hold SLEEP/TIMER for more
than 2 seconds.
» A prompt to select the source is
displayed.
4 Press CD, or TUNER or USB to select a
source.
5 Press SLEEP/TIMER to conrm.
» The clock digits are displayed and
begin to blink.
6 Press ALB/PRESET+/- to set the hour.
7 Press / to set the minute.
8 Press SLEEP/TIMER to conrm.
» The timer is set and activated.
To deactivate or re-activate an alarm timer
1 In standby mode, press SLEEP/TIMER
repeatedly.
» If the timer is activated, s is displayed.
» If the timer is deactivated, disappears.
Tip
• Bluetooth and MP3 LINK/PC IN mode cannot be
selected as the source of the alarm timer.
• If disc or USB source is selected but no audio le can
be played, radio is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
1 Press SLEEP/TIMER repeatedly until [OFF]
(off) is displayed.
» When sleep timer is deactivated,
disappears on the display.
Karaoke
You can connect a microphone and sing along
with a music source.
1 Turn MIC 1 VOL/MIC 2 VOL to the
minimum level.
2 Connect a microphone to the microphone
port on the unit.
3 Press CD, or TUNER, or USB, or PC
IN/AUDIO IN to select the source, and
start play.
4 Sing through the microphone.
• To adjust the volume of the source,
press VOL +/-.
• To adjust the volume of the
microphone, turn MIC 1 VOL/MIC 2
VOL.