1 Press and release the steam boost button.
1 The steam boost function can also be used when you hold the iron
in vertical position.
This is useful for removing creases from hanging clothes, curtains etc.
Never direct the steam at people.
This iron is equipped with a drip-stop function: the iron automatically stops
producing steam when the temperature is too low to prevent water from
dripping out of the soleplate. When this happens you may hear a sound.
1 The built-in Anti-Calc system reduces the build-up of scale and
guarantees a longer life for the iron.
The automatic shut-off function automatically switches off the iron if it
has not been moved for a while.
The red auto-off light ashes to indicate that the iron has been
switched off by the automatic shut-off function.
To let the iron heat up again:
1 Pick up the iron or move it slightly.
The red auto-off light goes out.
If the temperature of the soleplate has dropped below the set
ironing temperature, the temperature light goes on.
-
-
,
,
ENGLISH 7
To Next Page
Loading...
Need help?
General