Downloaded from www.vandenborre.be
5 Empty the steam tank by pouring the water into the sink.
6 Pour fresh water through the Calc-Clean hole with the lling cup. (Fig. 17)
7 Shake the steam tank well over the sink (Fig. 18)
8 Pour the water into the sink again. (Fig. 19)
9 Repeat steps 6 and 7 if there are still impurities in the water.
10 Firmly screw the Calc-Clean rinsing cap clockwise onto the steam tank.
11 Reattach the cord storage hook by turning it clockwise.
Make sure the appliance has cooled down sufciently before you put it away.
1 Remove the mains plug from the wall socket and let the appliance cool down.
2 Empty the water tank (Fig. 14).
3 Place the iron on the iron platform.
4 Fix the supply hose and mains cord in the cord storage hook. (Fig. 20)
Regularly check if the mains cord and the supply hose are still undamaged and safe.
- Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 21).
If you need information or if you have a problem, please visit the Philips website at
or contact the Philips Consumer Care Centre in your country (you nd its
phone number in the worldwide guarantee leaet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
10
4239.000.7496.1.indd 10 23-10-09 10:01
To Next Page
Loading...
Need help?
General