8
-
Warning: Never leave the appliance unattended when it is connected to the mains. Always unplug
the appliance after use.
Cleaning and maintenance
SmartCalc-CleanSystem
is done regularly. This helps to maintain a strong steam performance and prevents dirt and stains coming
reminders.
SoundandlightCalc-Cleanreminder
that you have to perform the Calc-Clean process (Fig. 14).
Fig. 15
This takes place regardless of the type of water used.
activated yet.
PerformingtheCalc-CleanprocesswiththeCalc-Cleancontainer
Warning: Do not leave the appliance unattended during the Calc-Clean process.
Caution:AlwaysperformtheCalc-CleanprocesswiththeCalc-Cleancontainer.Donotinterruptthe
processbyliftingtheironupfromtheCalc-Cleancontainer,ashotwaterandsteamwillcomeoutof
thesoleplate.
1 Fill up the water tank halfway.
Note: Make sure that the appliance is plugged in and switched ON during the Calc-Clean process.
2
3 Fig. 16).
4 Fig. 17).
Calc-Clean process. It is perfectly safe to rest the iron on this container during the entire process.
5 ).
6 Wait approximately 2 minutes for the appliance to complete the process (Fig. 19). When the Calc-Clean
7 Fig. 20).
Caution: The iron is hot.
8
Fig. 21).
9
start the Calc-Clean process.
accumulated inside the iron. This is normal.
http://www.philips.com/descaling-iron.
English
7 / 140
To Next Page
Loading...
