Using the appliance
Steam ironing
The supply hose may become hot during a long ironing session.
Note: The system may occasionally produce a pumping sound during steam
1 Make sure there is enough water in the water tank.
2
3
Steam ironing is only possible at ironing temperatures higher than 2.
4 GC8261/GC8260/GC8225/GC8220 only: Set the required steam
setting with the + and - buttons on the steam generator control
panel.
p for maximum steam (temperature setting MAX).
[ for moderate steam (temperature settings 3 to MAX).
] for minimum steam (temperature settings 2 to MAX).
a for no steam (temperature settings 1 to MAX).
heating up.
indicate that the steam generator is ready for steam ironing.
Note: During ironing, you can adjust the steam setting with the + and - steam
5 Press the steam trigger to start steam ironing.
When you put down the iron during ironing, put it on its heel or on the
iron stand.
The opening and closing of the steam valve in the steam generator
causes a clicking sound. This is normal.
Steam lock function
The steam lock allows you to steam iron non-stop without having to press
the steam activator continuously.
When you slide the steam lock forwards, the iron produces steam
continuously. To stop steaming, slide the steam lock backwards.
When the steam lock is deactivated, the iron only produces steam
when you press the steam trigger.
Note: Release the steam lock when you put the iron on its heel or on the iron
Vertical steaming
Never direct the steam at people.
,
,
,
-
-
ENGLISH10
To Next Page
Loading...
