Philips GC8620 - Stand Disassembly Advice; Stand Component Removal

GC8620
6-12
FILLING DOOR MOLDED 17
TRAY RUBBER CAP 19
TRAY CAP MOLDED 20
TRAY PRINTED 21
WATER TANK ASSY 23
Disassemble FILLING DOOR MOLDED 17
Remove TRAY RUBBER CAP 19 (4x)
Remove Screw K1, K2, K3, K4
Remove TRAY CAP MOLDED 20 (2x)
Remove Screw L1, L2
Disassemble TRAY PRINTED 21
Remove Screw N1, N2, N3, N4, N5
Disassemble WATER TANK ASSY 23
RINSE CAP ASSY 24
SAFETY CAP 25
INOX CLAMP 26
BRAIDED RUBBER HOSE BOILER 27
ELECTROVALVE 28
SPACER TOP 29
RINSE HOUSING CAP PRINTED 30
RINSE HOUSING MOLDED 31
O-RING 32
BOILER ASSY 33
BOILER SUPPORT BRACKET 34
SPACER BOTTOM 35
BOILER THERMISTOR ASSY 36
Disassemble RINSE CAP ASSY 24
Remove Screw N1, N2, N3, N4, N5
Disassemble WATER TANK ASSY 23
Remove SAFETY CAP 25
Release INOX CLAMP 26 (2x)
Disassemble BRAIDED RUBBER HOSE BOILER 27
Release Hose clip
Disconnect Wires
Disassemble ELECTROVALVE 28
Remove Screw O1, O2
Remove Screw P
Remove SPACER TOP 29
Remove Screw Q
Disassemble RINSE HOUSING CAP PRINTED 30
Remove Screw R
Disassemble RINSE HOUSING MOLDED 31
Disassemble O-RING 32
Disassemble BOILER ASSY 33
Disassemble BOILER SUPPORT BRACKET 34
Remove SPACER BOTTOM 35
Disassemble BOILER THERMISTOR ASSY 36
DISASSEMBLY ADVICE - STAND