Cleaning the oating valve
Note
•
If you have cooked ne or sticky foods,
the oating valve may be blocked.
Follow the below steps to disassemble
and clean the oating valve.
•
Grab the rubber ring around the
oating valve with your hands, gently
pull upwards to remove it from the
oating valve. Clean them with water
to remove food residues.
•
To assemble the oating valve, aim
the thinner end of the oating valve
to the hole and pass it through
the back of the inner lid (1), and
assemble the rubber ring around the
oating valve (2).
1
2
Cleaning the steam valve
•
Press the recession of the steam
valve to remove it from the top lid.
•
Press the hooks on the top of the
steam valve to disassemble it.
Soak in warm water and clean with
sponge.
•
To assemble the steam valve, fully
secure the bottom hooks rst, and
then press the top hooks until you
hear a click.