Step European (except
Germany and UK)
German British
c. Repeat steps 2 to 6
and ll the glass up to
the rim.
8 Close the tap in one
smooth movement.
Close the tap in one
smooth movement.
Close the tap in one
smooth movement.
9 a. Move the glass away
from the spout to
prevent drops of beer
from falling onto the
foam head.
Move the glass away
from the spout to
prevent drops of beer
from falling onto the
foam head.
Move the glass away
from the spout to
prevent drops of beer
from falling onto the
foam head.
b. Remove the foam that
rises beyond the rim of the
glass by passing a skimmer
over the rim of the glass at
an angle of 45°.
10 Your beer is now ready to
be served.
Your beer is now ready
to be served.
Your beer is now ready
to beserved.
Replacing the keg
The keg is empty when only foam comes out of the spout and
no beer. HD3720 only: the display also indicates that the keg is
empty.
1 Press the release button to the right to open the doors.
Make sure you open the doors fully.
2 Lift the blue locking levers completely.
3 Tilt the keg with the assembled tap unit towards you and
take it out of the appliance.
ENGLISH 19
To Next Page
Loading...
