Philips ADD6901 - User Manual

Questions and Answers

C
Colton KaneAug 13, 2025
Why is my Philips Dispenser leaking water?
- D
  Dr. Thomas RichardsonAug 13, 2025
  There are several reasons why your Philips Dispenser might be leaking water: * The removable drip tray may be full, in which case you should empty it. * The check valve on the tap water tank base might be blocked or in the wrong position; return the check valve to its original position or contact customer services. * The sealing valve at the bottom of the tap water tank may be blocked; remove the blockage. * If water is oozing from the dispenser, empty both the tap water tank and the filtered water tank, power off the dispenser, and then contact customer services.
S
Sherry GordonAug 16, 2025
What to do if my Philips Dispenser button/display panel does not respond?
- M
  Mark StarkAug 17, 2025
  If the button or display panel on your Philips Dispenser isn't responding, it could be due to damaged parts (in this case, contact customer services). Alternatively, the system may have halted. Try disconnecting the dispenser from the power supply for 1-2 minutes, and then plug it back in.
M
Mark GreenAug 20, 2025
Why does my Philips ADD6901 Dispenser water taste odd?
- D
  Dr. Paul PageAug 21, 2025
  If the water from your Philips Dispenser has an odd taste, it might be because: the new dispenser hasn't been cleaned, or the dispenser has not been used for a long time. In both cases, follow the cleaning procedures for first-time use. Also, the filter cartridge may need to be changed.
D
Donna MezaAug 25, 2025
What to do if my Philips Dispenser cannot filter water?
- K
  kingannaAug 25, 2025
  If your Philips Dispenser is not filtering water, there could be a few reasons: * The filter cartridge might not be installed properly. Disconnect the dispenser from the power supply, open the top lid, remove the filter cartridge, and then reinstall it correctly. * The water level in the tap water tank may be too low. Remove the tap water tank and add more water. * The tap water tank might not be installed correctly. Check the tap water tank and ensure it is properly installed.
A
Ashley NewmanAug 28, 2025
How to fix Philips Dispenser when it cannot extract ambient water?
- C
  Christopher BellAug 28, 2025
  If your Philips Dispenser is not extracting ambient water, it could be because: the product is not connected to the power supply. Check if the dispenser is properly connected. Also, make sure the water extraction button is pressed correctly; try pressing it again.
S
Susan FlowersSep 1, 2025
Why Philips ADD6901 Dispenser cannot extract hot water?
- E
  Edward HamiltonSep 1, 2025
  If your Philips Dispenser is not extracting hot water, it could be due to: the dispenser dry-heating (extract ambient water several times, and then extract hot water). Also, the water level in the filtered water tank may be low (wait for a while until the water filtration indicator stops flashing).
K
Kevin LambertSep 4, 2025
Why is my Philips Dispenser making a strange noise when filtering?
- J
  John CohenSep 5, 2025
  If your Philips Dispenser is making a strange noise while filtering, it could be that the tap water quality doesn't meet the requirements, causing the filter cartridge to block earlier than expected. Try changing the filter cartridge and check again.
L
Lynn DeanSep 8, 2025
What causes leakage of electricity in Philips ADD6901 Dispenser?
- R
  Raymond StewartSep 8, 2025
  Leakage of electricity in your Philips Dispenser may be caused by bad grounding (use a three-core plug with reliable grounding). Also, the power cord may be damaged (in this case, contact customer services).