Sleep mode
• If there is no operation within 1 minute, the dispenser will automatically go to sleep mode.
• When the dispenser is in sleep mode, only the safety lock indicator is on, and all other indicators are
• Touch any button to end the sleep mode.
Emptying the tank and pipes
• Long press "85℃" button and "300ml" button for 3 seconds, the dispenser
empty.
Note: In order to avoid dry-heating, if the tank and pipes have been emptied,
please extract some ambient water before extracting hot water.
If the product is not used for over two days, it is suggested to change the water in the tap water
tank and then empty the tank and pipes twice.
If the dispenser will not be used for over one week, please use one-key emptying to empty the
in the refrigerator (2-5°C, do not put it into the freezer). When you use it again, please follow the
7. Daily maintenance
Tap water tank descaling
• It is recommended to descale the tap water tank every 3 months to avoid
scale build-up in the tap water tank.
•
citric acid. Stir lightly then soak for 2 hours (do not place the tap water tank
back to the dispenser). Then discard the citric acid solution and clean the
entire water tank with tap water.
* Please purchase the cleaning brush and citric acid separately.
08
3s3s
To Next Page
Loading...
