40
ENGLISH
22
Reassemble the lid making sure that you press it in the middle to have
it correctly inserted.
23
Reassemble the Automatic Milk Frother making sure it is correctly
inserted.
24
Install the suction tube.
25
Insert the rubber tting on the chrome cover.
26
Reinsert them back onto the steam wand.
Warning:
The wand could be hot if the machine has recently been used.
Do not insert the rubber tting beyond the position shown. In this
case, the Automatic Milk Frother would not function correctly as it
would not be able to draw up milk.
To Next Page
Loading...
