Philips HD9395 - Boil-Dry Protection; Electromagnetic Fields (EMF); Warranty and Support

8
English
-
Never fill the kettle beyond the maximum level indication. If the kettle has
been overfilled, boiling water may be ejected from the spout and cause
scalding.
-
Be careful: the outside of the kettle and the water in it become hot during
and some time after use. Only lift the kettle by its handle. Also beware of the
hot steam that comes out of the kettle.
-
This appliance is intended to be used in household and similar applications
such as farm houses, bed and breakfast type environments, staff kitchen
areas in shops, in offices and in other working environments and by clients in
hotels, motels and other residential type environments.
Boil-dry protection
This kettle is equipped with boil-dry protection: it switches off automatically if
you accidentally switch it on with no or not enough water in it. Let the kettle
cool down for 10 minutes and then lift the kettle off its base. Then the kettle is
ready for use again.
Electromagnetic fields (EMF)
This Philips appliance complies with the standards regarding electromagnetic
fields (EMF).
Recycling
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
Follow your country’s rules for the separate collection of electrical and electronic
products. Correct disposal helps prevent negative consequences for the
environment and human health.
Unless otherwise indicated, all packaging material in the box is made of recycled
paper; see the PAP marking on the box.
Warranty and support
Versuni offers a two-year warranty after purchase on this product. This warranty
is not valid if a defect is due to incorrect use or poor maintenance. Our warranty
does not affect your rights under law as a consumer. For more information or for
invoking the warranty, please visit our website www.philips.com/support.
Before first use
Clean the inside of the kettle with warm water and mild detergent before first
use.
To ensure the cleanliness of your kettle and remove any potential manufacturing
residues, it is recommended to boil water before the first use.
Follow the steps in the 'Using the appliance' section, empty the kettle, and your
kettle will be ready for use.