Philips HD9880 - Page 13

13English
Note
• We recommend downloading the NutriU app and add your Airfryer to the
app as soon as you set up your appliance for the rst time. This enables you
to use the Airfryer to its full extent, for example, to enjoy remote cooking
(start recipes or Auto-Cook programs from the app, get notications when
food is done, etc.) and to get the latest rmware updates.
7. A QR code displays. Scan it to download the NutriU
app.
Tip
• You can also download the NutriU app from the App
Store or from the website www.philips.com/NutriU.
8. Open the NutriU app and follow the registration process.
9. Follow the steps in the app to connect your Airfryer to your WiFi and pair
your Airfryer with your smart device.
Important
• Remote control: you can remotely control your Airfryer through the app
(e.g. send a recipe, pause cooking, etc.) only if you have checked o the
“remote consent” in the NutriU app, to be found in your NutriU prole.
• Make sure to connect your Airfryer to a 2.4 GHz 802.11 b/g/n home WiFi
network.
• Single user pairing: the Airfryer can be remotely controlled by only one
user at the same time. If a second user wants to control the Airfryer and
use the NutriU app, this user has to follow the pairing process. Once
paired, the rst user will be unpaired automatically.
• The WiFi setup process can be cancelled via the app or by unplugging
the Airfryer.
WiFi indiacator
The WiFi indicator is o. WiFi is disabled.
The WiFi indicator is on. WiFi is enabled and connected to the router.
The WiFi indicator is blinking
slowly.
WiFi connection is ongoing.
The WiFi indicator is blinking
fast.
WiFi connection error.
Note
• You can turn WiFi on or o in "Settings" → "WiFi Setup".
• You can reset WiFi in "Settings" → "WiFi Setup"→"Turn OFF/ON WiFi".