EasyManua.ls Logo

Philips HeartStart FR2+ - Page 82

Philips HeartStart FR2+
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PHILIPS MEDICAL SYSTEMS
D-4
Quick Shock A feature of the FR2+ that provides a patient care pause-to-shock time of less
than 10 seconds, typical, from end of a patient care pause to shock delivery.
read (data) A feature of the HeartStart FR2+ that allows it to read setup data from a
M3854A data card.
receive (data) A feature of the HeartStart FR2+ that allows use of its infrared (IR)
communications port to receive revised setup and clock settings directly from
another device.
rechargeable battery The FR2+ rechargeable battery, used with the M3849A charger only.
record voice An optional feature of the HeartStart FR2+ that allows sound recording to a
data card during use of the device in an incident. Activation of this feature
requires revision of the HeartStart FR2+’s default configuration settings.
rhythm analysis See “
SMART analysis.
send (data) A feature of the HeartStart FR2+ that allows use of its infrared (IR)
communications port to send data directly to another FR2+ or a computer
running HeartStart Event Review software.
sensitivity A measure of the ability of the HeartStart FR2+ to reliably detect and identify
shockable heart rhythms.
setup The settings of all programmable operating parameters of the HeartStart FR2+.
The factory default setup can be modified using the M3864A Training &
Administration Pack.
shock series One or more shocks, each separated by no more than a preset interval
(programmed Protocol Timeout). After completion of a shock series, the
HeartStart FR2+ automatically pauses for CPR.
shockable rhythm Ventricular fibrillation and certain ventricular tachycardias associated with
sudden cardiac arrest.
shock waveform See “
SMART biphasic waveform.
SMART analysis The proprietary algorithm used by the FR2+ to analyze the patient’s heart
rhythm and determine whether a shock is advised.
SMART biphasic waveform The patented, low-energy defibrillation shock waveform used by the FR2+. It is
an impedance-compensated biphasic waveform with 150 Joules, nominal,
delivered to a 50 ohm load. When delivered via FR2 infant/child reduced-energy
defibrillator pads, the energy is attenuated to 50 Joules, nominal.

Related product manuals