PHILIPS MEDICAL SYSTEMS
F-1
F
F CONFIGURATION
OVERVIEW
The HeartStart comes with a factory default configuration designed to meet the
needs of most users. This configuration can only be changed by an authorized
person using HeartStart Configure PDA software or Event Review software. This
software is for use by trained personnel. Information about HeartStart data
management products is available online at www.philips.com/eventreview.
DEVICE OPTIONS
The following table includes the features of HeartStart operation that are not
related to patient treatment.
parameter settings default default description
speaker volume 1, 2, 3, 4,
5, 6, 7, 8
8 The volume of the HeartStart’s speaker is set
to 8, highest.
auto send periodic
self-test (PST) data
On, Off On Enables the periodic self-test data to be
broadcast through the device's infrared data
port.
ECG out data On, Off On Enables the ECG data to be broadcast
through the device's infrared data port.
To Next Page
Loading...
