Philips HES4900/12 - Tune to FM radio stations; FM Radio Tuning and Programming

25
Program radio stations
manually
Note
You can program a maximum of 20 preset radio 
stations.
1 Tune to a radio station.
2 Press REPEAT/PROGRAM to activate
programming.
3 Press / to allocate a number from
1 to 20 to this radio station, then press
REPEAT/PROGRAMWRFRQÀUP
7KHSUHVHWQXPEHUDQGWKHIUHTXHQF\»
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store another 
station in its place.
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Tip
You can also use the numerical keypad to select a 
preset station directly.
Set RDS clock
You can use time signal broadcast together with
the RDS signal to set the clock of the apparatus
automatically.
6 Tune to FM
radio stations
1 Ensure that you have connected and fully
extended the supplied FM antenna.
2 Press RADIO.
3 Press and hold / ( / ).
4 :KHQWKHIUHTXHQF\LQGLFDWLRQVWDUWVWR
change, release the button.
The FM tuner tunes to a station with »
strong reception automatically.
5 Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press
/ ( / UHSHDWHGO\XQWLO\RXÀQG
optimal reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio 
stations.
1 Press / to select a preset number to
start programing.
2 Press and hold REPEAT/PROGRAM
for 2 seconds to activate automatic
programming.
» [AUTO]DXWRLVGLVSOD\HGEULHÁ\
All available stations are programmed »
in the order of waveband reception
strength.
The last programed radio station is »
broadcast automatically.
English
EN