12
English
The default duration of the wake-up curve (brightness increase to the set
maximum light intensity) is 30 minutes. Press icon to change the
duration of the wake-up profile to your preference.
Press + or - to increase or decrease the brightness of the light in the wake-
up curve.
Type of sound
Press this icon to open the sounds menu to set the sound of the wake-up
profile.
1 Press the toggle icon to choose one of the three sounds options: a
natural sound, radio or no sound.
2 Press the natural sound icon to select one of the natural sounds or
press the radio icon to select one of the radio presets.
3 You can set the volume with the loudspeaker icon .
Time + alarm back-up
In the event of a power failure, all functions of the appliance, including
the display, do not work. However, the internal clock and a back-up alarm
remain active for at least 8 more hours.
If during the power failure the set alarm time is due, a back-up alarm goes
off generating a beeping sound for approximately 30 seconds.
Snoozing
When the wake-up curve has ended (when the set maximum light
intensity has been reached) and the alarm sound is playing, you can tap
the top of the appliance to snooze.
The lamp stays on, but the sound is muted. After 9 minutes, the alarm
sound starts playing again.
Note: The light and sound automatically turn off 60 minutes after the
alarm has gone off or 60 minutes after the last snooze action.
Dismissing the alarm
When the wake-up curve is active or the alarm goes off, you can dismiss it
by pressing this icon on the appliance. If you dismiss the alarm, the alarm
profile is deactivated for that day.
To Next Page
Loading...
