C
5 Put the filter in the juice collector. Make sure the filter is fitted
securely onto the driving shaft ('click').
Always check the filter before use. If you detect any cracks or damage
do not use the appliance and contact the nearest Philips service centre
or take the appliance to your dealer.
C
6 Hold the lid over the filter and lower it into position.
C
7 Snap the two clamps onto the lid to lock it into place ('click').
Make sure the clamps are locked into position on either side of the lid.
C
8 Slide the pusher into the feeding tube by aligning the groove in
the pusher with the small protrusion on the inside of the
feeding tube.
C
9 Place the juice jug under the spout.
Place the lid on the juice jug to avoid splattering or if you want to store
the juice in the refrigerator.
ENGLISH8
To Next Page
Loading...
