None of the recipes in these instructions for use constitute heavy
loads.
◗ Never reach into the feeding tube with your fingers or an object
while the appliance is running. Only the pusher is to be used for
this purpose.
◗ Only unlock the clamps after you have switched the appliance off
and the filter has stopped rotating.
◗ Do not remove the pulp container when the appliance is in
operation.
◗ Do not touch the small cutting blades in the base of the filter.
◗ Always unplug the appliance after use.
◗ Never immerse the motor unit in water or any other liquid. Do
not rinse it either.
◗ Noise level: Lc= 75 dB [A]
Preparing for use
1 Wash all detachable parts (see chapter 'Cleaning').
C
2 Pull the mains cord out of the cord storage compartment at
the back of the appliance.
C
3 Place the juice collector into the appliance.
C
4 Place the pulp container into the appliance by tilting it forwards
slightly. Insert the top end first and then push home the
bottom end.
While you are preparing juice, you can empty the pulp container by
switching the appliance off and carefully removing the pulp container.
B
Reassemble the empty pulp container before you continue juicing.
ENGLISH 7
To Next Page
Loading...
