Philips HTL2150 - 6 Product Specifications

11 EN
6 Product
specifications
Note
• Specicationsanddesignaresubjecttochangewithout
notice.
Amplier
• Total output power: 60W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 2 V
• AUDIO-IN: 1V
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
Main unit
• Power supply: 220-240 V~, 50 Hz - 60 Hz
• Power consumption: 30 W
• Standbypowerconsumption:≤0.5W
• Speaker impedance: 6 ohm (Tweeter), 4
ohm (Woofer)
• Frequency response: 160 Hz-20 kHz
• Dimensions (WxHxD):
800 x 75.6 x 52.4 mm
• Weight: 1.2 kg
Subwoofer
• Impedance: 8 ohm
• Speaker drivers: 130 mm (5.25") woofer
• Frequency response: 45 Hz-200 Hz
• Dimensions (WxHxD):
165 x 240 x 295 mm
• Weight: 2.6 kg
• Cable length: 3 m
Remote control batteries
• 1 x CR2025