Philips HTL2160 - Product Specifications; Amplifier and Audio Specifications; USB and Bluetooth Features; Main Unit, Subwoofer, and Battery Specs

12EN
6 Product
specifications
Note
• Specicationsanddesignaresubjecttochangewithout
notice.
Amplier
• Total output power: 60W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 2 V
• AUDIO-IN: 1V
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16 and FAT32
• SupportsMP3andWMAleformats
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
• Version:
• WMA: V7, V8, V9
Bluetooth
• Bluetoothproles:A2DP
• Bluetooth version: 2.1 + EDR
Main unit
• Power supply: 220-240 V~, 50 Hz - 60 Hz
• Power consumption: 30 W
• Standbypowerconsumption:≤0.5W
• Speaker impedance: 8 ohm (Tweeter),
4 ohm (Woofer)
• Frequency response: 160 Hz-20 kHz
• Dimensions (WxHxD):
• 800 x 75.6 x 52.4 mm
• Weight: 1.2 kg
• Operating temperature and humidity:
0°C to 40°C, 5% to 90% Humidity for all
climates
• Storage temperature and humidity: -40 °C
to 70 °C, 5% to 95%
Subwoofer
• Impedance: 8 ohm
• Speaker drivers: 130 mm (5.25") woofer
• Frequency response: 45 Hz-200 Hz
• Dimensions (WxHxD):
165 x 240 x 295 mm
• Weight: 2.6 kg
• Cable length: 3 m
Remote control batteries
• 1 x CR2025