To Next PageTo Next Page
Need help?Do you have a question about the Philips HTS3357 and is the answer not in the manual?
Picture and Display| D/A converter | 12 bit, 108 MHz |
|---|---|
| Picture enhancement | High Def (720p, 1080i), Progressive Scan |
Sound| Total output power | 600 W |
|---|---|
| Output power (RMS) | 4x75W, 2x150W |
| D/A converter | 24 bit, 192 kHz |
| Frequency response | 150-18000 Hz |
| Signal to noise ratio | >65 dB |
Video Playback| Compression formats | MPEG1, MPEG2, DivX 3.11, DivX 4.x, DivX 5.x, DivX 6.0, DivX Ultra |
|---|---|
| Playback media | DVD-Video, DVD+R/+RW, DVD-R/-RW, Video CD/SVCD, CD-R/CD-RW |
| Video disc playback system | NTSC, PAL |
Audio Playback| Compression format | MP3, WMA |
|---|---|
| Playback media | Audio CD, DVD+R/+RW, DVDR/-RW, CD-R/RW |
| MP3 bit rates | 32-256 kbps and VBR |
Loudspeakers| Satellite speaker drivers | 3" full range woofer |
|---|---|
| Satellite speaker impedance | 3 ohm |
| Satellite speaker frequency range | 150-20000 Hz |
| Center speaker drivers | 1 x 2" tweeter, 2 x 2.5" woofers |
| Center speaker impedance | 6 ohm |
| Center speaker frequency range | 150-20000 Hz |
| Subwoofer driver | 6.5" high efficiency woofer |
| Subwoofer impedance | 6 ohm |
| Subwoofer frequency range | 40-150 Hz |
Power| Power supply | 50Hz, 230V |
|---|---|
| Standby power consumption | < 1 W |
Dimensions| Set dimensions | 435 x 55 x 310 mm |
|---|---|
| Set weight | 4.04 kg |
| Front speaker dimensions | 95.5 x 198 x 75 mm |
| Front speaker weight | 0.62 kg |
| Rear speaker dimensions | 95 x 1184 x 73.5 mm |
| Rear speaker weight | 3.47 kg |
| Center speaker dimensions | 435 x 93.5 x 67 mm |
| Center speaker weight | 1.28 kg |
| Subwoofer dimensions | 159.5 x 355.5 x 370 mm |
| Subwoofer weight | 4.78 kg |
| Packaging dimensions | 924 x 470 x 470 mm |
| Weight including packaging | 22.7 kg |
Learn how to start playing discs, including opening the tray, auto-play, menu navigation, and surround sound activation.
Connect and play audio from USB devices and portable audio players using the provided MP3 LINE-IN cable.
Optimal positioning of speakers and subwoofer for superior sound performance is detailed.
Instructions on how to connect the main unit to your television using video cables for display.
Connect the tall speakers, other speakers, and subwoofer to the main unit's color-coded sockets.
Properly connect the FM/AM antennas and the system's power cable for initial operation.
Connect your TV's audio output to the system to enjoy TV sound through the home theatre speakers.
Steps to power on the system and TV, and select the correct viewing channel for setup.
Configure the system's OSD language through the setup menu for user interface preferences.
