What to do if the contents of the card cannot be read on Philips HTS3306 Home Theater System?
The card is not compatible or the contents on the card may be damaged. Turn off and then turn the unit on again.
How to enable 5.1-channel audio on my Philips Home Theater System?
If you're not getting 5.1-channel audio from your Philips Home Theater System, first, confirm that the disc actually contains 5.1-channel audio. Then, set “Audio Output” to “Speakers” in the settings menu. Also, check that the surround mode is not set to “2.1ch Stereo”; if listening to a stereo source, press [SURROUND] and select “Dolby Pro Logic II Music” or “Dolby Pro Logic II Movie”.
What to do if there is no audio from the Philips HTS3306 Home Theater System speaker system?
If you're not getting any audio from your speaker system, first, try increasing the volume. If that doesn't work, go into the setup menu and set “Audio Output” to “Speakers”. Also, ensure that the audio isn't muted and that you've selected the correct active source for external audio input.
What to do if there is no video signal on the display device with Philips HTS3306 Home Theater System?
If you're not getting a video signal on your display device with the Philips Home Theater System, first, make sure the TV is turned on and set to the correct external input. If the issue persists, select the correct video resolution in the “HDMI Video” settings menu. As a last resort, press and hold the play button on the front panel for 5 seconds to revert to the default settings.
Why is there no high-definition video signal on the TV screen from Philips Home Theater System?
If there's no high-definition video signal on your TV screen when using your Philips Home Theater System, check if the disc contains high-definition video and if your TV supports high-definition video.
What to do if you cannot use the Wi-Fi connection on Philips HTS3306 Home Theater System?
Once you have activated the Wi-Fi connection please wait for 30 seconds for the connection to be established after turning on the unit, before trying to access network features such as BD-Live™, Netflix, Film Fresh, Blockbuster, VUDU or Pandora.
Why does the Philips HTS3306 show an error message when I select 'Auto' in the 'Menu Language'?
This error message may appear when your TV's OSD language is not supported by this unit. Make sure that the unit is connected to the Philips brand EasyLink TV and the “EasyLink” is set to “On”.
Why Philips HTS3306 Home Theater System cannot connect to the network while my PC is connected to the network?
Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting at the same time.
What to do if Philips HTS3306 cannot use the BD-Live™ function?
If your Philips Home Theater System cannot use the BD-Live™ function or the download of data doesn't perform properly, insert an SD card with enough capacity (1GB or more). Check if the SD card is correctly inserted and that the write-protect switch on the SD card is not enabled.
What to do if Philips HTS3306 cannot find a JPEG file?
If your Philips Home Theater System cannot find a JPEG file, make sure that the selected group (folder) does not contain more than 9,999 files for Blu-ray Disc™ / DVD / SD card, and 999 files for CD. Also, ensure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Sound Specifications| total power (RMS) | 1000 W |
|---|---|
| center frequency range | 180-20000 Hz |
| satellite speaker frequency range | 180-20000 Hz |
Power| power supply voltage | 120V |
|---|---|
| power supply frequency | 60Hz |
Loudspeakers| satellite speaker drivers | 3" full range woofer |
|---|---|
| satellite speaker impedance | 4 ohm |
| subwoofer driver | 6.5" high efficiency woofer |
| subwoofer frequency range | 60-80000 Hz |
| subwoofer impedance | 4 ohm |
Weight and Dimensions| set dimensions (W x H x D) | 435 x 59 x 295.6 mm |
|---|---|
| packaging dimensions (W x H x D) | 624 x 362 x 394 mm |
| set weight (with stand) | 3.6 kg |
| weight including packaging | 12.50 kg |
To Next Page
